How to Hide TV Cords on the Wall (Clean Setup Guide)

My TV was mounted. The furniture looked nice. Everything should have felt finished—but every time I walked into the room, my eyes went straight to the dangling cords. It made the entire wall look unfinished.

For the longest time, I had a wall-mounted TV that looked almost clean — except for the dangling cords underneath. No matter how I tried to ignore them, they made the whole setup feel unfinished.

So I finally fixed it. I used an in-wall cable management kit to route everything behind the wall.

And honestly? It was way easier than I expected.

As an Amazon Associate, I earn from qualifying purchases.

Before You Cut the Wall

Important note before you start: don’t just run a regular extension cord behind the wall and call it a day. For power, use a proper in-wall power kit designed for this type of setup, or have an outlet installed by an electrician. HDMI and low-voltage cables are one thing; power is where you want to be boring and safe.

🧠 Why I Wanted to Hide My TV Cords

If you’ve ever mounted a TV, you probably know the problem:

• cords hanging down the wall
• visible power cables
• HDMI wires ruining the look

Even if everything else is styled nicely, those cords pull your eye right to them.

I wanted:

• a clean, minimal look
• no visible wires
• something that didn’t look DIY in a bad way

🔧 What I Used

I used an in-wall cable management kit to route everything behind the wall.

It included:

• a hole saw attachment
• cable pass-through plates
• extension cord system for safe power routing

This is what allowed me to move both power and HDMI cables behind the wall safely, instead of just covering them.

🛠️ How I Did It (Simple Version)

I’m not super handy, so this was very much a “follow the instructions and hope for the best” situation 😅

Here’s the basic process:

1. Cut two small holes in the wall

• one behind the TV
• one near the outlet below

The kit came with the exact drill attachment, which made this part way less intimidating.

2. Installed the cable plates

These sit flush against the wall and make everything look clean and finished.

3. Ran the cables through the wall

• power cord
• HDMI cables

Everything drops down inside the wall and comes out near the outlet.

4. Plugged everything in below

So now:
– nothing is visible behind the TV
– all cords are hidden inside the wall

✨ The Before vs After

Before:

• cords hanging down
• cluttered look
• distracting

After:

• completely clean wall
• no visible wires
• looks way more intentional

This honestly made a bigger difference than I expected.

⚠️ A Few Things to Know

• Make sure you’re comfortable cutting drywall (it’s easier than it sounds, but still)
• Use a proper in-wall kit for safety (especially for power)
• Double check stud placement before cutting

💡 Was It Worth It?

100% yes.

This is one of those small home upgrades that:

• looks expensive
• feels intentional
• takes less time than you think

And now I don’t even think about it anymore — which is kind of the whole point.

🔧 Products That Made This Easier

Then break it into:

“In-Wall Cable Management Kit — The main fix”
“Full Motion TV Mount — Helpful if you need access behind the TV”
“Stud Finder — The thing you do not want to skip”
“Cord Labels or Velcro Ties — Optional, but future-you will be grateful”

If you’re trying to recreate this, here’s what I actually used to hide everything behind the wall:

🧰 In-Wall Cable Management Kit

This is what made the biggest difference.

• lets you run cords safely behind the wall
• includes everything needed to cut and install
• keeps both power + HDMI hidden

👉 This is how I got the “no cords showing” look.

📺 TV Wall Mount

I used a full motion wall mount so I could:

• adjust the angle
• access the back easily during setup

It made installing everything way easier.

🧲 Stud Finder

Before cutting anything, I used a stud finder to:

• avoid drilling into studs
• place everything correctly

Highly recommend not skipping this step 😅

🛒 Shop My Setup

If you want to recreate this exact setup, I put everything I used here:

Other Small Home Fixes That Made a Big Difference

• Home organization ideas
• Amazon Basics problem-solving solutions
• Living room improvements

Frequently Asked Questions About Hiding TV Cords

What is the easiest way to hide TV cords?

The easiest way to hide TV cords is with a paintable cord cover that attaches to the wall with adhesive strips. It keeps cables organized without requiring you to cut into the wall or hire an electrician.

Can renters hide TV cords without damaging the wall?

Yes. Many cord covers use removable adhesive strips, making them a renter-friendly option. Always check the product instructions and test a small area first if you’re concerned about wall damage.

Is it safe to cover TV cords?

Yes, as long as you use products designed for cable management and avoid overloading power strips. Keep cords organized and make sure there is adequate airflow around electronics.

How much does it cost to hide TV cords?

Simple cord management solutions can cost less than $20, while more advanced in-wall cable kits can cost $50 or more. My solution was inexpensive and only took a few minutes to install.

What’s the difference between a cord cover and an in-wall cable kit?

A cord cover hides cables inside a channel attached to the wall, while an in-wall cable kit routes cables behind the drywall. Cord covers are generally easier, cheaper, and more renter-friendly.

Can I paint a TV cord cover to match my wall?

Many cord covers are paintable, which helps them blend in with your wall color and become less noticeable.

How do I hide cords from a wall-mounted TV?

A cord cover is one of the simplest options. It creates a clean path from the TV to the outlet and helps eliminate the look of dangling cables.

Do cord covers work for gaming consoles and streaming devices?

Yes. Cord covers can organize HDMI cables, power cords, streaming devices, soundbars, and gaming console wires, helping your entertainment area look much cleaner.